Pond Liner-Install a Repair Patch Using a PondGard EPDM Liner Repair Kit

Install a Repair Patch Using a PondGard EPDM Liner Repair Kit or Tape

Step 1- Ensure the liner is dry and free of mud or other contaminants.

Step 2- Apply the QuickPrime Plus primer by pouring a small amount
onto the scrubber pad and applying it to the surface of the PondGard
beyond the perimeter of the area to be repaired with a patch.

Step 3- Test the primer flash-off by touching the primed area with
your finger and pushing forward at an angle. The primer should not
string as your finger is moved up and away.

Step 4- Install the QuickSeam patch by peeling away the release paper
and placing the patch over the damaged area of the liner.

Step 5- Roll the patch evenly over the area to be repaired in order to
properly mate the patch and liner together.